FREE SHIPPING IN CONTINENTAL U.S. - BUY A ROCKER PLATE, GET 20% OFF A ROCKER PLATE ACCESSORY BOUGHT AT THE SAME TIME.
FREE SHIPPING IN CONTINENTAL U.S. - BUY A ROCKER PLATE, GET 20% OFF A ROCKER PLATE ACCESSORY BOUGHT AT THE SAME TIME.
With smooth side-to-side and fore/aft motion, the Velocity Rocker In-The-Raw is a rocker plate for indoor training that takes your indoor cycling to a new level. With it you experience a much more realistic ride as your bike moves freely underneath you and your connection to the saddle is more like being outdoors. Less friction means less opportunity for sit bone pain and saddle sores. Subtle fore/aft movement while spinning gives you the sensation of not being locked in place and powerful sprinting and climbing efforts are met with a generous 6.5 inches of fore/aft movement. This is why a Velocity Rocker rocker plate for indoor training brings you much closer to a true simulation of riding outdoors. Unfinished wood that is ready to be your DIY masterpiece.
The side-to-side rocking motion of a rocker plate allows the saddle to stay under the sit bones. This minimizes the friction otherwise caused by a fixed bicycle trainer and stationary saddle, reducing the likelihood of developing saddle sores. Additionally, the proper alignment of the ankle, knee, and hip with the side-to-side movement puts less stress on your joints and can help you achieve a more powerful pedal stroke.
Riding in a virtual cycling environment like Zwift is a big improvement over years past. However, having your bicycle move freely underneath you while riding on the Velocity Rocker feels much more realistic and completes the simulated experience.
The Velocity Rocker for indoor cycling helps you to engage your upper body stabilizing muscles and core just as you do when riding outside. Because the Velocity Rocker allows you to comfortably ride longer due to greatly reduced saddle/sit bone friction, the amount of time you work your core also increases significantly.
Although rare, anecdotal evidence suggests stresses placed on a bicycle frame from hard efforts on a fixed bicycle trainer may cause frame fatigue leading to structural damage. This is due to torsional forces absorbed by the frame. These forces are dissipated through the motion of the rocker plate, especially when the rocker plate has fore/aft motion.
Moving the Velocity Rocker with the easy-to-install caster wheels makes cleaning your pain cave or relocating it a breeze. No need to take your bike off which can be a nuisance with a direct-drive smart trainer and a dangling greasy chain. Then there’s the hassle of removing the trainer just to have to set it up all over again. Read the instructions in the FAQs section for details on how to install and use the caster wheels.
When your indoor training session requires the added ambience of a lively setting, turn on your programmable and integrated RGB LED lights. Control them with the downloadable LED lights app or remote control. They allow you to sync the lights to your favorite music and change the color scheme at will.
It is highly compatible with most new and old trainers on the market. If you are unsure if yours will fit or if you have an unusually large bike, feel free to contact us to check for compatibility. The Wahoo Kickr Climb works well with the Velocity Rocker as do all front risers. (The Elite Riser may need some modifications)
We make the Velocity Rocker to last! Each unit is reinforced with L-shaped aluminum support rails. Even though 3/4 inch, 13-layer cabinet grade baltic birch plywood is the best you can use, we want to ensure that the top plate maintains its rigidity for years to come. No other rocker plate provides this feature.
A built-in spirit level is installed for easier set up. Additional protective features such as rubber feet and rubber pads for trainer contact points are included as well.